This is a near plug and play wire harness for both K20, K24 and K series variant's in your 2000-2005 Toyota MR2 Spyder for your K Swap. We now offer 3 different K swap harnesses for use with Honda/Hondata, Link Fury, or Ktuner ECU's and does not require the use of the Factory MR2 ECU. This adapter does require the Acura RSX Type S engine and charge harness from the 2002-2004 model with the Hondata ECU. For the Ktuner, you can use a 05-06 Harness or K24 harness. Link ECU will require a 02-04 RSX Type S Harness. This K series swap harness with provides OBDII functions as well. Installation instruction can be found in our download section.
As of 02-02-2021, our new Version 4 Hondata Harness has new update's including wire changes to increase installation ease and reduce possible peripheral electrical issues. We are constantly evolving this harness to make it better.
As of 08-04-2021, We will be offering Version 5 of the Hondata Harness, which will fully support wideband control and will start production of PNP harnesses for Link and Ktuner
NOTE: Battery Light, Oil Pressure Light, and Water Temp will not function with this k swap harness. You will need our MIM to control those functions. Harnesses are made by hand using OEM connectors and pins, hand fabrication takes 24-4 hours.
Pros: Functioning OBDII, turn key with modification to 2 wires
Cons: No A/C provisions, No adapter for O2 sensor (require for emissions testing) The most basic version available
Pros: Functioning OBDII, turn key with modification to 2 wires, adapter for O2 sensor (required for most emissions testing)
Cons: No A/C provisions
Pros: Functioning OBDII, turn key with modification to 2 wires, A/C Provisions, adapter for O2 sensor.
Pros: Functioning OBDII, turn key with modification to 3 wires, A/C provisions
Cons: No adapter for emissions.