This harness bar kit made for the BRZ, FRS, and GT86 models is a direct bolt in and attaches to the OEM rear seat belt points as well as the suspension points in the trunk floor. Made from 5mm steel plate and CDW350 grade roll cage tube, this kit is both strong and user friendly. Requiring no trim modification, install time is estimated to be 60-90 min with relatively basic tools. This kit comes powder coated satin black with one eye bolt mounting kit and stepped spacer to complete ALL of the mounting points required to fit your 4-point race harness. The harness IS NOT included in this kit. See install guide under Install Guides
Required tools-
- 3/8 drive ratchet
- 3/8 drive extension bar
- 10mm socket
- 14mm socket1
- 7mm socket
- 6mm hex bit
- ⅜ socket (or 6mm allen key)
- 16mm combination spanner
- Trim removal tool (or flat blade screwdriver)
- If fitting one eye bolt to the tunnel, you will need a drill with a 12mm drill bit